Currencies

Race Bike Bits 4 Track Day & Race Fairing Kits

At Race Bike Bits we supply Race Fairing kits to fit Honda, Ducati, Suzuki, Yamaha, Triumph, BMW and Kawasaki Race bikes and Superbikes. We not only sell Race fairing kits but we are also riders and know what it means to be out on a racetrack flying by the seat of your pants against your mates down the back straights and around the corners. We not only sell Fiberglass races kits but we use our own products on our own race bikes so we know our race fairing kits and race body work stands up to the punishment that’s expected on a race circuit at race speeds.

Race Fairings, Included Parts

All our race fairing kits comes with all the main panels you need to get your bike up and ready for a race meet or trackday event, including the front guard, front (Nose) fairing, main sides with enclosed bellypan, and complete tail fairing.

From Road Trim to Race Trim

A full fiberglass race belly pan is fully enclosed on all our fiberglass race fairing kits and is designed to contain all your motorbikes fluids in the advent of an engine or gasket failure.

This type of belly pan prevents fluids getting onto the track and endangering other riders.

We can also provide tank covers for some models but this is normally an extra item unless advertised with a kit.

Race Fairing Bodywork - Finish & Quality

Race Bike Bits fiberglass race fairings come finished in a gelcoat finish and just require rubbing down to get them ready for primer and paint to be applied. All mounting points are marked but un-drilled and fitment is a simple enough process with a bit of skill with a few basic tools.Our race bodywork is produced from reinforced fiberglass weave, utilising a flexible resin and gelcoat.

Fitting Our Race Fairing Kits

Fitting a fiberglass race fairing is easy enough but you do need to own a few basic tools and have a bit of technical know-how in order to fit them. Always check twice before drilling.

If your bikes been in an accident fitting a race fairing kit may be difficult or impossible if you have not checked your bikes frame and mounting points for straightness.

From Road Trim to Race Trim

If your bike has an aftermarket exhaust and headers, then fitting a race belly pan may be an issue as some race headers sit lower than a standard exhaust. Our Race fairing kits are designed and tested to fit Superbikes and Motorbikes that have standard factory headers.

Mounting a fiberglass race fairing kit is always much simpler if you have a second set of helping hands.

Fitted fberglass race fairing kit picture.

Race Bike Bits, Upgrade Your Race Fairing Kit Order

Race bike Bits have an optional upgrade kit available for our fiberglass race fairing kits and this kit includes many essential parts that are required when fitting a race fairing kit, such as:

Front Screen
Screen fasteners (Well nuts)
Quick release fasteners (Duez Style D-ring)
Race Foam for a SBK Race tail (If you chose that style tail)
Extra reinforcing around the edges and mounting points on your race fairing kit

Race Fairing Kits & Track Day Bodywork
by Race Bike Bits - Australia & NZ

Race Bike Bits 4 Track Day & Race Fairing Kits

At Race Bike Bits we supply race Fairing kits to fit Honda, Ducati, Suzuki, Yamaha, Triumph, BMW and Kawasaki Superbikes. We not only sell race fairing kits but we are also riders and know what it means to be out on a racetrack flying by the seat of your pants against your mates down the straights and around corners. We not only sell Fiberglass race kits but we use our own products on our own race bikes, so we know our race fairing kits and race body work stands up to the punishment that’s expected on a race circuit at race speeds.

Race Fairings, Included Parts

From Road Trim to Race Trim

A full fiberglass race belly pan is fully enclosed on all our fiberglass race fairing kits and is designed to contain all your motorbikes fluids in the advent of an engine or gasket failure.

This type of belly pan prevents fluids getting onto the track and endangering other riders.

We can also provide tank covers for some models but this is normally an extra item unless advertised with a kit.

Race Fairing Bodywork - Finish & Quality

Race Bike Bits fiberglass race fairings come finished in a gelcoat finish and just require rubbing down to get them ready for primer and paint to be applied.

All mounting points are marked but un-drilled and fitment is a simple enough process with a bit of skill with a few basic tools.

Our race bodywork is produced utilising a flexible resin & reinforced fiberglass weave with a gelcoat finish.

Fitting Our Race Fairing Kits

Fitting a fiberglass race fairing is easy enough but you do need to own a few basic tools and have a bit of technical know-how in order to fit them. Always check twice before drilling.

If your bikes been in an accident fitting a race fairing kit may be difficult or impossible if you have not checked your bikes frame and mounting points for straightness.

From Road Trim to Race Trim

Mounting a fiberglass race fairing kit is always much simpler if you have a second set of helping hands.

Race Bike Bits, Upgrade Your Race Fairing Kit Order

Race bike Bits have an optional upgrade kit available for our fiberglass race fairing kits and this kit includes many essential parts that are required when fitting a race fairing kit, such as: